Solid cast bronze. These straight chocks are perfect for stern line chores.

4" Straight Chock
.88" x 4".                                                                                Fastener =  #10

5" Straight Chock
1" x 5".                                                                                    Fastener =  #10

6" Straight Chock
1.19" x 6".                                                                              Fastener = 1/4"

Our bronze G Chock skene series is clean and functional. Installs with two 1/4"  fasteners that disappear visually from the side. Sold in sets of 2, port and starboard.

Spartan Marine's locking chock has been designed to quickly accept an anchor or mooring line and lock it in place. This chock can also be considered for the stern where rising and falling tides can easily cause a dock line to escape from a straight chock.

Solid manganese bronze for a tough cast construction. A strong 5/16 stainless steel bolt easily slides to form a large 1.5" opening between the chock jaws. The wide 1.625" chock base has three mounting holes for 1/4" fasteners. 

Solid bronze 1" rail chock designed to mortise into a wood toe rail. Installs with two 1/4" fasteners through the top and two 1/4"diameter bronze pins through the sides.

OAL length = 10.125" 
Width = 1"
Chock opening = 3.5" x 1.375"

Solid cast bronze. This mid-rail chock is unique in that it provides a cleat incorporated with two chocks. The chocks allow for running dock lines or spring lines while the cleat allows for terminating lines directly.

Handsomely designed, each chock mounts with five 1/4" fasteners into a mortised rail.

11"  Model
A dim. = 1.0625"
B dim. = 1.375"
H dim. = 1.0625"
X° = 8.5°
Y° = 8.5°

11.75"  Model
A dim. = 1"
B dim. = 1.25"
H dim. = 1.5"
X° = 12°
Y° = 0°

Cast bronze and traditional appeal add up to a strong and handsome cleat. Long a favorite among both power and sail boatsmen. Each cleat has a four-hole mounting base. They also make great handles for doors and cabinets.

6.5" uses #12 fasteners
8" uses 5/16" fasteners
10" uses 5/16" fasteners
12" uses 3/8" fasteners

Cast bronze and traditional styling. 4 hole open base.

5" and 6" use 1/4" fasteners
7" and 8" use 5/16" fasteners

Cast bronze with traditional styling. 2 hole open base.

3" C253 uses #8 fasteners
4" C201 uses #10 fasteners
5" C190 uses 1/4" fasteners
6" C196 uses 1/4" fasteners

Cast bronze traditionally styled jam cleats adequately handle 1/4" and 3/8" line respectively.

3" 2 hole uses #8 fasteners.

6" 4 hole uses 1/4" fasteners

Our uniquely designed coaming cleat makes mounting cleats on wood coamings simple and effective. Each cleat has mounting holes threaded for 1/4-20 MS.